What DPC and ISR latency are
Hardware drivers do part of their work in Interrupt Service Routines (ISRs) and Deferred Procedure Calls (DPCs). Both run at a high priority in the Windows kernel. If one driver spends too long there, other work, including your audio driver refilling its buffer, has to wait.
Audio is real-time: the buffer must be refilled before it runs empty. When it is not, you hear a click, crackle or short dropout, even though overall CPU usage looks low.
Rule out the other causes
- DAW or plugin overload: the DAW's own performance meter is high. Freeze tracks or raise the buffer.
- Buffer too small for the project size.
- Disk streaming: large sample libraries on slow or full drives.
- Thermal throttling: a hot laptop slows down under load.
If glitches happen even with a light project and a generous buffer, DPC/ISR latency becomes the main suspect.
Measure before you change anything
- Use a project that reliably reproduces the problem.
- Run a latency monitor while it plays. LatencyMon is a common free option; DAW-TIMIZER's Latency Lab records DPC/ISR, CPU, RAM, hard faults and disk activity on one timeline.
- Mark the moment you hear the glitch, so you can compare it with the measurements.
- Save the run as your baseline.
Common suspects
These device types often appear in latency reports. Investigate them one at a time:
- Wi-Fi and network adapters
- Graphics drivers, including HDMI and DisplayPort audio
- ACPI and power management (often linked to aggressive power saving)
- Storage controller and NVMe drivers
- Bluetooth adapters and some USB hubs
Fixes, in a sensible order
- Update the suspect driver from the device or PC manufacturer.
- Test power settings: a performance-oriented plan and mains power on laptops. See the Windows 11 setup checklist.
- Temporarily disable an unneeded device for one test, for example Wi-Fi when you record offline. Re-enable it if it makes no difference.
- Raise the buffer for mixing sessions.
- Check BIOS/UEFI updates from your manufacturer as a separate task.
- Measure again with the same project and compare with your baseline.
What not to do
- Do not apply registry "tweak packs" or timer-resolution hacks you cannot explain.
- Do not disable processor idle states in every power plan as a default step.
- Do not disable your only audio output or devices your workflow depends on.
- Do not trust a single score: listen to real playback and recording.
Where DAW-TIMIZER helps
Latency Lab ties DPC/ISR activity to the DAW process you select and to your glitch markers, and lets you open a saved baseline next to a new run. The compact Studio Monitor keeps marker and stop controls on screen while you work. Measurements remain system-wide, and no measurement alone proves the cause of a dropout.
For the full workflow, read the measured Windows audio optimization guide.
Frequently asked questions
What is a good DPC latency value for audio?
There is no single threshold that guarantees dropout-free audio for every interface, buffer size and project. Compare runs on your own system and listen to real playback.
Which drivers cause high DPC latency?
Network, Wi-Fi, graphics, ACPI power management, storage and Bluetooth drivers appear often in reports. A driver named in a report is a lead to investigate, not proof.
Does a bigger buffer fix DPC latency?
A bigger buffer gives the audio driver more time and can hide occasional spikes, at the cost of higher latency. It does not remove the underlying driver issue.
Is LatencyMon enough to fix dropouts?
It is a useful measurement tool. The fix still comes from updating or reconfiguring the responsible driver or setting and confirming the result with the same project.
Sources and further reading
Written by Andy Prinz, music producer and developer of DAW-TIMIZER. Editorial review: October 2026.
More studio guides
Put the workflow in one place.
Explore DAW-TIMIZER T7's diagnostic, MIDI, studio and backup tools. Downloads always include the latest T7 update; owners of any earlier version update for free.
Get CYBER · CHF 39One-time purchase. 2 computers. Plus applicable taxes.